The BPC-910 unit can be operated in three modes, Master(indicated by a Red light), Slave(indicated by a Orange light), or Stand alone mode(indicated by a Green light).

 Offering two controll systems, either a DMX 512 protocol data out put, for smart RGB LED systems, or, a direct 3 Wire RGB PWM dimming connection, for controlling simple RGB LED units. This amount of flexiblity from such a small unit, is making this one of the most sort after control units in any installation, small or large.

Master and Slave

In Master mode, the unit will act as a controll unit only, having no direct contact or control over RGB led units. Instead it will only send out the required data signal to control the other BPC-910 units operating in Slave mode. Imagine the Master as the brain, or the CPU of the system.(A maximum of 10 slaves can be connected)

 When operated in Slave mode, the BPC-910 will recieve the controll signal from the "Master unit" and perform the required colour changing effects synchronised with the master unit. The Slave unit will be directly controlling the LED via the RGB(Red,Green,Blue) power output. 

Stand Alone

The BPC-910 unit can also be run in stand alone mode, this allows for smaller jobs where the LED units will generaly be confined to one area, and a power level below 15Amp on 5-24V. The unit will run the colour controll of the connected LED light fittings. 

Applications

External LED lighting  

Internal LED Lighting

Small to medium size installations